Here you can get our XCNAV Edition along with our XCREMOTE 2. An unbeatable combination.
 
Using our XCRemote in conjunction with XCSoar, you can also control the XCVARIO.
 
New: Now also available with SH starter button or HpH electric trim knob
 
XCNavEdition
 
Due to a change in our production process and the resulting delay, we took the opportunity to completely overhaul our system once again. In addition to an upgrade to Android 11, our
 
XCNav Edition 4 "System buttons," which feature controls for volume, brightness, Escape, and Enter, as well as an XCSOAR Quick Menu button, making it easier to operate the device without using the touchscreen.
 
​
 
What makes our system so unique?
 
It's simple. It gives you complete freedom to choose your favorite navigation solution! Whether it's XCSoar, LK8000, TopHat, Cumulus, EasyVfr, VfRNav, or any other app—all apps available on the Google Play Store run on your computer and can be easily updated through it!
 
Freedom in the skies at last!
 
And all of this is conveniently integrated into your control panel, featuring a sunlight-readable transflective display and easy operation via the touchscreen or our XCRemote joystick remote control.
 
Plus full connectivity via LTE and/or Bluetooth or Wi-Fi! No extra charge and no dongle required!
 
​
 
Android-based multi-platform navigation system
 
 
 
RK3566 Quad-Core Processor, 1.8 GHz, 16 GB ROM
 
 
7-inch PCAP transflective, vibration-tested touchscreen (no loss of optical properties due to optical bonding of the touch digitizer)
 
 
Full connectivity via Wi-Fi, Bluetooth 4.1, Bluetooth Low Energy, and LTE modem (requires a separate SIM card). As a result, our edition fully supports apps designed for mobile devices, such as XCSoar, LK8000, etc. (WeGlide Upload, WX, Airspaces, etc.)
 
 
Android 11 operating system: Use it just like you would on a smartphone! No complicated disassembly, reassembly, or connecting cables for updates. Simply update apps online via the pre-installed Google Play Store. Android system updates are also made available online.
 
 
Easy to use with a touchscreen and 4 buttons; no additional DIY input devices are required.
 
 
In addition, our BT joystick remote control, the XCRemote, is available.
 
 
Compatible with Stefly and OV input devices; these can simply continue to be used.
 
 
Plug`N`Play
 
 
Perfectly tailored to XCVario
 
 
Low power consumption (measured at 12.3V, full brightness):    Standalone: ~300mAh (~3.7W)  with XCRemote: ~360mAh (~4.4W)  with XCRemote and XCVario: ~520mAh (~6.4W)
 
 
Wide-range, secure power supply, 11–36 V IN. Internally protected by a 3 A AutoFuse.
 
 
Thanks to the transflective screen, heat generation is minimal, eliminating the need for additional power-consuming fans (the device remains only slightly warm to the touch even during continuous operation)
 
 
Inputs/Outputs:    1 x USB 3.0 OTG  3 x USB 2.0  2 x RJ45 RS232TTL IGC pinout with 12V/0.5A (Vin=Vout) power supply, internally fused, for connecting Flarm, Vario, loggers, etc.  1 x HDMI for future two-seat unit  1 x 3.5mm audio out  1 x MicroSD card reader  1 x 5V 0.5A out, internally fused, for connecting our XCREMOTE Bluetooth joystick remote control or a USB PowerOut socket, etc.
 
 
XCNAV Edition does not have any internal sensors. These must be provided by peripheral hardware such as Flarm, loggers, variometers, etc. XCNAV Edition offers 2 x RS232 TTL-level interfaces for transmitting the NMEA data set. Hardware compatibility depends on support from the hardware drivers of the app being used and the protocol of the respective instrument. XCNAV assumes no responsibility for this.
 
A second touchscreen display for use in a two-seater is currently under development.
 
So whether you use it as a trip computer in your glider or as a companion in your ultralight, the days of suction cup mounts and hard-to-read cell phone screens are finally a thing of the past!